|
|
|
真空傳送印刷單元
◆印刷輥為優質鋼，表面研磨，鍍硬鉻。
◆平衡校正，運轉平穩。
◆卷軸掛版，采用左右兩邊鎖緊裝置，使掛版對位準確。
◆全版掛版溝，適用 10mm×3mm 掛版條。
◆裝卸印刷板，腳踏開關電動控制正反轉。
◆采用真空吸附輸送紙板 ( 送紙輪表面為陶瓷、增加耐磨及壽命 )。不必使用拉紙環就可以使紙板通過印刷部。
◆壓印輥間隙調整采用電腦及電子數字式控制，控制范圍 0-12mm。
◆印刷相位調整采用伺服電機驅動。
◆印刷相位固定裝置，電磁離合器制動式剎車機構。當單元分離調整相位或清洗時，剎車機構限制齒輪轉動，保持原有齒輪位置固定點。
◆橫向相位采用電腦控制，控制范圍 ±10mm。
◆清洗印版后自動復位系統。
◆氣壓式單隔膜泵，供墨穩定，操作保養簡單。
◆供墨異常，警示燈顯示。
◆濾網過濾墨中雜質，保護網紋輥。
◆腔刮刀供墨系統下配有墨槽。
◆自動切換清洗裝置，讓水墨回收更徹底。
Vacuum Transfer Printing Unit
◆The printing rollers are rollers are made by high quality steel, hard chrome plating,surface grinding.
◆Balance correction make the machine running more steadily.
◆Scroll hanging the printing sheet,adopt lock device by both sides.Make the sheet in correct regestration.
◆Full sheet hanging channel,Fit for 10mm×3mm hanging bar.
◆Pedal switch control the printing roller turning forward or back off when install the printing sheet.
◆Adopts vacuum transfer(The surface of the transfer wheel is made by ceramic,in order to increase the rub and using life).Can transfer the cardboard without transfer roller.
◆The adjustment of the Printing presure rollers space adopts computure control,between 0-12mm.
◆Servo motor is adopted for phose adjustment.
◆Immobilization device of the printing phose.Electromagnetic clutch brake type brake mechanism.The Brake mechanism to limit gear rotation,Maintain the fixed position of the original gear when the units seperate or adjust the phose and cleaning.
◆Horizontal phase using computer control,±10mm.
◆Automatic reset system after cleaning plate.
◆Pneumatic single diaphragm pump,Ink supply stability,Operationand maintenance is simple.
◆Warning light displays when Ink supply anomaly .
◆The rosebox filters the impurity substance of the ink,to protect the anilox.
◆Ink tank is placed under the Single blade ink supply system.
◆Automatic switching cleaning device makes ink recycling more thorough.
|
|
|
